Flashing redmi note 4 phones are not very easy to flash,you need to  know  the proper way of flashing. In this method of flashing there is no matter either your phone is dead or working.

So to flash redmi note 4 with locked bootloader first of all charge the phone atleast 50% above  and make sure you have a original data cable which comes with the phone, for flashing you required this files so first download this files  first…….

  1. mi pc suite
  2. mi flash tool
  3. winrar (to unzip the stock rom)
  4. redmi note 4 flash file  (for redmi note 4 download Redmi Note 4 Qualcomm Latest Global Stable version)

After downloading all this file ,first install the mi pc suite then install mi flash tool and after that unzip the redmi note 4’s flash file  and store all this on desktop.

First method of flashing redmi note 4 with locked bootloader

This is the very easy method of flashing redmi note 4 with locked bootloader by xiaomi flashing cable, this is a special cable which only used for flashing redmi phones, basically this cable helps to directly enter the phone in EDL mode.

Now the flashing process is going to start

  •  so first turn on the computer with disable driver signature enforcement
  •  then turn off the phone and connect the phone to the pc with holding the button of the  xiaomi flashing cable and the phone will enter in EDL mode
  •  In EDL mode phone will go blank with red blink over the top , it  means the phone is on edl mode.
  •  Now run the mi flash tool and first click on refresh and there will be seen a connection of phone ex:(com10 or com12 or com14)
  • then select the flash file and in bottom select clean all and then click on flash.

The flashing process will taken approx 25 minutes so dont be panic and dont remove the cable until there success screen poped up. And the first boot up of the phone will takes arround 15minutes.

Second method of flashing redmi note 4 with locked bootloader

This method of flashing redmi note 4 with locked bootloader is quite a technical method of flashing. After downloading and installing all the required files start this process

    • first remove the sim tray and  back panel of the phone
    • then disconnect the battery and on the left side you will find 2 pins(check the video for more help)
    • connect the 2 pins with any metal connectors or with metal chimta tool
    • then while holding this metallic connectors, connect the cable and the phone will jump in the edl mode (black screen)
    •  Now run the mi flash tool and first click on refresh and there will be seen a connection of phone ex:(com10 or com12 or com14)
    • then select the flash file and in bottom select clean all and then click on flash.

The flashing process will taken approx 25 minutes so dont be panic and dont remove the cable until there success screen poped up. And the first boot up of the phone will takes arround 15minutes.

This 2 methods will work in Redmi note 4, redmi 4 and redmi 4A